TRSS-485 control signal surge protection device

Model: TRSS-485

Color: white / red

Verification: CE

Product working principle

TRSS-485 signal surge protector is connected in series with the front end of the protected device. When the transmission line is subjected to induced lightning and other transient overvoltage surges, the inrush current is discharged to the earth through the protection branch of the surge protector, and the output is output. The voltage is clamped to the voltage range allowed by the device, thus ensuring the safety of the operating equipment.

Product specifications

product description

TRSS-485 signal lightning arrester is mainly used for lightning (overvoltage) protection of equipment entering the equipment along the low voltage control signal line. It is widely used in financial systems, telecommunication systems, transportation systems, stone chemical control systems, such as various data. Transmission line, monitoring control line, instrumentation signal line, etc.

Product Features

1, with overcurrent, overvoltage, clamp triple protection.

2. When a lightning strike is intruded, there is no need to suspend the power equipment and it will not affect the normal equipment operation.

3, the design is novel, small.

4. Low insertion loss.

5, the transmission rate is high, and the frequency of use is large.

Use attention

1. This product is connected in series.

2. Please select the same type of interface as the protected device interface.

3. The IN of the lightning arrester is the input, the OUT is the output, the input terminal is connected to the external line, and the output end is connected to the input end of the protected device.

4. The PE wire of the lightning protection device must be reliably connected with the ground wire of the lightning protection system. The connection wire is required to be short, thick and straight.

Company Profile

Thor is all about protecting against the damaging effects of power transients. It is our goal and mission to connect our customer challenges with high-quality, right-priced solutions and products – completed by unrivaled customer service and technical support.

Thor is all about protecting against the damaging effects of power transients. It is our goal and mission to connect our customer challenges with high-quality, right-priced solutions and products – completed by unrivaled customer service and technical support.

Incorporated in 2006, Zhejiang Thor Electric Co., Ltd has built everything to offer a wide range of innovative and reliable surge protection solutions and products.

Thor is following the international quality system standards, is ISO 9001 certified and our technical standards are in line with GB18802.1-2011/IEC61643-1.

All types and classes of our lightning and surge arresters 20KA~200KA(8/20μS) and 15KA~50KA(10/350μS) are tested and pass all the requirements based on their class.

Thor has been designing new products to meet the RoHS directive since 2006. Thor’s ongoing commitment to RoHS compliance includes continuing efforts to reduce the presence of hazardous substances in the design and manufacture of a growing number of popular products.

Zhejiang Thor Electric Co., Ltd is committed to meeting the requirements of the European Union’s Waste Electrical and Electronic Equipment (WEEE) directive. This directive requires producers of electrical and electronic equipment to finance the take-back for re-use or recycling of their products placed on the EU market after 2005.