Network, digital TV, monitoring signal, lightning protection, two
in one protector, household
Product introduction
The control signal network lightning protection dual one protector
is used to protect the sensitive high-speed communication line from
the damage caused by the lightning induction voltage, the power
interference, the electrostatic discharge and so on. The
multi-stage protection circuit, the selection of brand components,
the use of advanced production technology, with a large flow
capacity, low residual pressure level, sensitive reaction, stable
performance, reliable work and so on.
Product features
1. PCB is designed with microstrip, good isolation, low line
disturbance
2. core components are strictly screened, stable performance and
reliable operation.
3. extremely low online resistances reduce unnecessary attenuation
of signal intensity and increase the distance of signal
transmission to the maximum.
4. advanced production process and beautiful appearance
Product specification
| Type | TRSS-RJ45 |
| Max continuous operating voltage Uc(VAC) | 5V |
| Nominal discharge current (8/20μS) ln(kA) | 5kA |
| Voltage protection level Up(kV)≤ | 20V |
| Adaptive date transfer rate | 100/1000Mbps |
| Insertion loss | ≤1dB |
| Respeonse Time | ≤1ns |
| Protect network lines | 1~8 |
| Surface Properties | 100x25x25 |
| Line interface | RJ45 |
| Way to lnstall | Series Connection |
Working principle of product
During the operation of the equipment, the lightning arrester will
play a protective role once the abnormal voltage occurs. When the
protected device is running under normal working voltage, the
arrester will not work, and it will be regarded as a circuit for
the ground. Once the high voltage is present and the insulation of
the protected equipment is endangered, the lightning arrester acts
immediately and leads the high voltage impact current to the earth,
thus limiting the amplitude of the voltage and protecting the
insulation of the electrical equipment. When the overvoltage is
gone, the arrester is restored to its original state quickly, so
that the system can supply electricity normally. The main function
of the lightning arrester is to reduce the voltage value of the
protected equipment through the action of parallel discharge gap or
nonlinear resistance, and to reduce the voltage value of the
protected equipment, so as to protect the power equipment.
Use of attention
1. the lightning protector input terminal (IN) is connected to the
signal channel, and the output terminal (OUT) is connected with the
input end of the protected device, so it cannot be connected.
2. connect the grounding wire of the lightning protector to the
ground wire of the lightning protection system.
3. lightning arresters are connected in series.
4. this product needs no special maintenance. The lightning
arrester should be checked regularly, especially in the
thunderstorm season and the whole thunderstorm period. When the
system fails to doubt the lightning arrester, the lightning
arrester can be dismantled and rechecked. If the system is restored
to normal after the restoration to the state before use, it
indicates that the lightning arrester has been damaged and must be
replaced immediately.
Company profile
Zhejiang Thor Electric Co., Ltd is committed to meeting the
requirements of the European Union’s Waste Electrical and
Electronic Equipment (WEEE) directive. This directive requires
producers of electrical and electronic equipment to finance the
take-back for re-use or recycling of their products placed on the
EU market after 2005.
Product packaging:Carton packing
Transportation method
1. Express company: FEDEX,UPS,DHL,TNT
2. Trains, ships, aircraft transport
