Monitoring network signal, two in one, multifunctional power
supply, lightning protector, household protection surge
Product Details
The control signal network lightning protection dual protection
device is designed and manufactured according to the standard of
IEC and GB, and meets the requirements of IEEE802.3AT. It is
suitable for the server, wireless AP, network camera, network
switch, computer communication system, monitoring and control
system, door control system, automatic control system, and security
system, which are powered by POE network wire. Lightning protection
and surge protection for all kinds of signal circuits, such as data
transmission, etc.
Product specification
| Type | TRSS-RJ45 |
| Max continuous operating voltage Uc(VAC) | 5V |
| Nominal discharge current (8/20μS) ln(kA) | 5kA |
| Voltage protection level Up(kV)≤ | 20V |
| Adaptive date transfer rate | 100/1000Mbps |
| Insertion loss | ≤1dB |
| Respeonse Time | ≤1ns |
| Protect network lines | 1~8 |
| Surface Properties | 100x25x25 |
| Line interface | RJ45 |
| Way to lnstall | Series Connection |
Working principle of product
During the operation of the equipment, the lightning arrester will
play a protective role once the abnormal voltage occurs. When the
protected device is running under normal working voltage, the
arrester will not work, and it will be regarded as a circuit for
the ground. Once the high voltage is present and the insulation of
the protected equipment is endangered, the lightning arrester acts
immediately and leads the high voltage impact current to the earth,
thus limiting the amplitude of the voltage and protecting the
insulation of the electrical equipment. When the overvoltage is
gone, the arrester is restored to its original state quickly, so
that the system can supply electricity normally. The main function
of the lightning arrester is to reduce the voltage value of the
protected equipment through the action of parallel discharge gap or
nonlinear resistance, and to reduce the voltage value of the
protected equipment, so as to protect the power equipment.
Use of attention
1. identify the input / output interface identifier of the
lightning protector, input the external line and output the device.
2. grounding lines should be short, thick and straight, so as to
reduce the influence of distributed inductors on the ability of
lightning electromagnetic pulse.
3. the grounding of the signal protector should be connected to the
grounding grid through the electronic switch.
4. the lightning protector is connected between the protected
device and the signal channel in series.
Product features
1. traffic flow to further improve safety
2. limit the precision of the voltage to say how much!
3. installation and use of convenient novice can also be easy to
install
4. strict product structure, meticulous and comprehensive
protection
Company profile
Incorporated in 2006, Zhejiang Thor Electric Co., Ltd has built
everything to offer a wide range of innovative and reliable surge
protection solutions and products
