Computer room dedicated rack type network surge protection device
Model: Trss-rj11 / 45
colour:white
Authentication: CE ECM
Product Details
TRSS-RJ45/8 network lightning protection device is designed and
manufactured according to the standard of IEC and GB, and meets the
requirements of IEEE802.3AT. It is suitable for the power supply of
the communication equipment such as the server, wireless AP,
network camera, network switch and so on, which can supply the
power supply of the POE network wire, the network signal circuit,
the integrated integrated design, and the installation is
convenient and applicable. In multiple network signal line
centralized protection, it is mainly used for lightning (over
voltage) protection along network signal lines, such as 8, 16 and
24 Ethernet switches.
Product features
1. multi-functional overvoltage protection, lightning and
overpressure are no longer afraid of disasters.
2. the aluminum alloy is strong and durable, protecting your
computer.
3. low output residual pressure to further ensure safety
4. transmission performance, excellent insertion loss, high
transmission frequency and low attenuation coefficient, ensure that
the lightning arrester does not affect the system performance.
Use of attention
1. lightning arrester must be reliably connected to the ground wire
of the lightning protection system, and the connection line is
short, thick and straight.
2. when installing, attention should be paid to cables coming in
and out of surge protective devices, so as to avoid the two
coupling of surge.
3. please recognize the interface and the way of connection.
4. identify the input / output interface identifier of the
lightning protector, input the external line and output the device.
Product specification
| Model and specofocation | | TRSS-RJ45/4 | TRSS-RJ45/8 |
| Rated Operating Voltage | Un | 5V/12V |
| Max continuous operating voltage | Uc | 6V/15V |
| Voltage protective level | Up(V)〈 | 40/60 |
| Max discharge current | Imax(8/20μS) | 5kA |
| Nominal discharge current | In(8/20μS) | 3kA |
| Response time | ns | ≤1 |
| Adaptive date transfer rate | | 100Mbps |
| Insertion loss | | ≤0.3dB |
| Configuration dimension | | 104×25×25 |
| Protective circuit | | 1.2.3.6 | 1.2.3.4.5.6.7.8 |
| Operating condition | | Temp:-40℃~+70℃ |
| | RH≤95%(25℃) |
| | Sea level elevation≤3km |
| Remarks | | Other max continuous operating voltage can be customized |
Working principle of product
The working principle of network lightning arrester is to present
high resistance open state with a low voltage, low resistance short
circuit state at high pressure, and a combination of over voltage
protection electronic devices which can withstand hundreds of
amperes and large current in parallel on power supply line and
signal transmission line. When encountering lightning and high
voltage and high current, it will appear short circuit immediately,
and at the same time, the total power switch will be disconnected,
so that the computer equipment will be protected.
It can be used not only to protect the high voltage of the
atmosphere, but also to protect the high voltage. If there is a
thunderstorm, a high voltage will appear and the electric equipment
may be dangerous. At this point, the arrester will play a role to
protect the power equipment from damage. The most important
function of the arrester is to limit the overvoltage to protect the
electrical equipment. Lightning arrester is a device to make the
lightning current flow into the earth, so that the electrical
equipment does not generate high voltage.
Company profile
Incorporated in 2006, Zhejiang Thor Electric Co., Ltd has built
everything to offer a wide range of innovative and reliable surge
protection solutions and products.
Thor is following the international quality system standards, is
ISO 9001 certified and our technical standards are in line with
GB18802.1-2011/IEC61643-1.
Product packaging:Carton packing
Transportation method
1. Express company: FEDEX,UPS,DHL,TNT
2. Trains, ships, aircraft transport
