Universal Network Surge Protector Anti-jamming Universal Network
Camera
Model:Trss-rj11 / 45
colour:white
Authentication:CE ECM
Product description
The TRSS-RJ45/8 type network lightning arrester is used on the RJ45
interface of the LPZ2- LPZ3 partition interface to protect Ethernet
computers, servers, switches, routers and other network devices.
The network surge protector is suitable for lightning strikes or
other surge protection of network devices such as SWITCH, HUB,
ROUTER and computers of six types of wiring systems. It has the
characteristics of large flow capacity, low residual pressure
level, sensitive reaction, stable performance and reliable
operation.
It is designed and manufactured according to the standard of IEC
and GB, and meets the requirements of IEEE802.3AT. It is suitable
for the power supply of the communication equipment such as the
server of the POE network wire, the wireless AP, the network
camera, the network switch and so on. The integrated integrated
design and the installation are convenient.
Product specification
| Model and specofocation | | TRSS-RJ45/4 | TRSS-RJ45/8 |
| Rated Operating Voltage | Un | 5V/12V |
| Max continuous operating voltage | Uc | 6V/15V |
| Voltage protective level | Up(V)〈 | 40/60 |
| Max discharge current | Imax(8/20μS) | 5kA |
| Nominal discharge current | In(8/20μS) | 3kA |
| Response time | ns | ≤1 |
| Adaptive date transfer rate | | 100Mbps |
| Insertion loss | | ≤0.3dB |
| Configuration dimension | | 104×25×25 |
| Protective circuit | | 1.2.3.6 | 1.2.3.4.5.6.7.8 |
| Operating condition | | Temp:-40℃~+70℃ |
| | RH≤95%(25℃) |
| | Sea level elevation≤3km |
| Remarks | | Other max continuous operating voltage can be customized |
Working principle of product
During the operation of the equipment, the lightning arrester will
play a protective role once the abnormal voltage occurs. When the
protected device is running under normal working voltage, the
arrester will not work, and it will be regarded as a circuit for
the ground. Once the high voltage is present and the insulation of
the protected equipment is endangered, the lightning arrester acts
immediately and leads the high voltage impact current to the earth,
thus limiting the amplitude of the voltage and protecting the
insulation of the electrical equipment. When the overvoltage is
gone, the arrester is restored to its original state quickly, so
that the system can supply electricity normally. The main function
of the lightning arrester is to reduce the voltage value of the
protected equipment through the action of parallel discharge gap or
nonlinear resistance, and to reduce the voltage value of the
protected equipment, so as to protect the power equipment.
Use of attention
1. standard RJ45 interface can be conveniently connected to the
front end of the protected equipment. The grounding path should be
as short as possible, and the length should not exceed 1.5 meters.
2. after correct installation, it can work steadily for a long
time. If it is found that the transmission performance of the
system is reduced or the signal is interrupted due to the cause of
surge protection, it should be maintained or replaced in time.
3. the grounding of the signal protector should be connected to the
grounding grid through the electronic switch.
4. lightning protector is between the protected device and the
signal channel.
Product features
1. multi-functional overvoltage protection, lightning and
overpressure are no longer afraid of disasters.
2. transmission performance, excellent insertion loss, high
transmission frequency and low attenuation coefficient, ensure that
the lightning arrester does not affect the system performance.
3. installation and use of convenient novice can also be easy to
install
4. strict product structure, meticulous and comprehensive
protection
Company profile
Zhejiang Thor Electric Co is following the international quality
system standards, is ISO 9001 certified and our technical standards
are in line with GB18802.1-2011/IEC1643-1.
Ltd is committed to meeting the requirements of the European
Union’s Waste Electrical and Electronic Equipment (WEEE) directive.
This directive requires producers of electrical and electronic
equipment to finance the take-back for re-use or recycling of their
products placed on the EU market after 2005
