Rail Mount Ethernet Surge Protective device Easy Installation
Model: Trss-rj11 / 45
colour:white
Authentication: CE ECM
Working principle of product
The lightning arrester can effectively protect the power equipment.
Once the abnormal voltage appears, the lightning arrester will play
a protective role. When the protected device is running under
normal working voltage, the arrester will not work, and it will be
regarded as a circuit for the ground. Once the high voltage is
present and the insulation of the protected equipment is
endangered, the lightning arrester acts immediately and leads the
high voltage impact current to the earth, thus limiting the
amplitude of the voltage and protecting the insulation of the
electrical equipment. When the overvoltage is gone, the arrester is
restored to its original state quickly, so that the system can
supply electricity normally. The main function of the lightning
arrester is to reduce the voltage value of the protected equipment
through the action of parallel discharge gap or nonlinear
resistance, and to reduce the voltage value of the protected
equipment, so as to protect the power equipment.
Product features
1. core components are strictly screened, stable performance and
reliable operation.
2. the product has many interfaces and is easy to use. It doesn't
need to worry about the number of interfaces.
3. upgrade transistor is equivalent to 2 diodes
4. metal shielding layer, to prevent electromagnetic interference,
so that the signal is more stable.
Product specification
| Model and specofocation | | TRSS-RJ45/4 | TRSS-RJ45/8 |
| Rated Operating Voltage | Un | 5V/12V |
| Max continuous operating voltage | Uc | 6V/15V |
| Voltage protective level | Up(V)〈 | 40/60 |
| Max discharge current | Imax(8/20μS) | 5kA |
| Nominal discharge current | In(8/20μS) | 3kA |
| Response time | ns | ≤1 |
| Adaptive date transfer rate | | 100Mbps |
| Insertion loss | | ≤0.3dB |
| Configuration dimension | | 104×25×25 |
| Protective circuit | | 1.2.3.6 | 1.2.3.4.5.6.7.8 |
| Operating condition | | Temp:-40℃~+70℃ |
| | RH≤95%(25℃) |
| | Sea level elevation≤3km |
| Remarks | | Other max continuous operating voltage can be customized |
Product Details
The TRSS-RJ45/8 type network lightning arrester is a lightning
protection measure taken by Zhejiang tohr Electric Co., Ltd. to
independently develop and manufacture the network system.
It is suitable for railway communication system, mobile base
station, differential station, hard disk recorder, video
surveillance equipment, optical terminal and other network
transmission equipment to avoid overvoltage damage such as
inductive lightning stroke and electrostatic discharge introduced
by the system. The grounding point is treated by special process to
avoid signal interference. It adopts multi-level protection
circuit, low residual pressure level and good protection effect.
Use of attention
1. lightning protector is between the protected device and the
signal channel.
2. please choose the network switch lightning protector which is
the same as the protected device's interface type.
3. the lightning protector of the network switch should match the
working voltage of the protected device. When installing, please
connect according to the installation sketch map.
4. lightning protector should be regularly tested during operation.
If there is any failure, it should be maintained or replaced in
time to ensure equipment safety.
Company profile
Zhejiang Raytheon Electric Co., Ltd. was founded in 2006, and is
committed to provide various innovative and reliable surge
protection solutions and products.
We are committed to meeting the EU Directive on waste electrical
and electronic equipment. This Directive requires manufacturers of
electrical and electronic equipment to put their products back into
the EU market after 2005, then use or recycle them.
