Anti-jamming High Performance Network Surge Protector Affordable
Model:Trss-rj11 / 45
colour:white
Authentication :CE ECM
Working principle of product
The working principle of network lightning arrester is to present
high resistance open state with a low voltage, low resistance short
circuit state at high pressure, and a combination of over voltage
protection electronic devices which can withstand hundreds of
amperes and large current in parallel on power supply line and
signal transmission line. When encountering lightning and high
voltage and high current, it will appear short circuit immediately,
and at the same time, the total power switch will be disconnected,
so that the computer equipment will be protected.
Product features
1. the speed of response is 0.001 seconds, and the voltage is
controlled in the range that the equipment can withstand.
2. limit the precision of the voltage to say how much!
3. core components are strictly screened, stable performance and
reliable operation.
4. extremely low online resistances reduce unnecessary attenuation
of signal intensity and increase the distance of signal
transmission to the maximum.
Product specification
| Model and specofocation | | TRSS-RJ45/4 | TRSS-RJ45/8 |
| Rated Operating Voltage | Un | 5V/12V |
| Max continuous operating voltage | Uc | 6V/15V |
| Voltage protective level | Up(V)〈 | 40/60 |
| Max discharge current | Imax(8/20μS) | 5kA |
| Nominal discharge current | In(8/20μS) | 3kA |
| Response time | ns | ≤1 |
| Adaptive date transfer rate | | 100Mbps |
| Insertion loss | | ≤0.3dB |
| Configuration dimension | | 104×25×25 |
| Protective circuit | | 1.2.3.6 | 1.2.3.4.5.6.7.8 |
| Operating condition | | Temp:-40℃~+70℃ |
| | RH≤95%(25℃) |
| | Sea level elevation≤3km |
| Remarks | | Other max continuous operating voltage can be customized |
Product description
The TRSS-RJ45/8 type network lightning arrester is used on the RJ45
interface of the LPZ2- LPZ3 partition interface to protect Ethernet
computers, servers, switches, routers and other network devices.
The network surge protector is suitable for lightning strikes or
other surge protection of network devices such as SWITCH, HUB,
ROUTER and computers of six types of wiring systems. It is used to
protect sensitive high-speed communication network from damage
caused by lightning induced voltage, power interference,
electrostatic discharge and so on. The signal lightning arrester
adopts the multilevel protection circuit, selects the world famous
brand components and makes use of the advanced production
technology. It has the characteristics of large flow capacity, low
residual pressure level, sensitive reaction, stable performance,
reliable work and so on.
Use of attention
1. when installing, attention should be paid to cables coming in
and out of surge protective devices, so as to avoid the two
coupling of surge.
2. please recognize the interface and the way of connection.
3. identify the input / output interface identifier of the
lightning protector, input the external line and output the device.
4. lightning protector is between the protected device and the
signal channel.
Company profile
Thor has been designing new products to meet the RoHS directive
since 2006. Thor’s ongoing commitment to RoHS compliance includes
continuing efforts to reduce the presence of hazardous substances
in the design and manufacture of a growing number of popular
products.
All types and classes of our lightning and surge arresters
20KA~200KA(8/20μS) and 15KA~50KA(10/350μS) are tested and pass all
the requirements based on their class.
