Photovoltaic grid connected power supply, lightning surge surge
protector, three phase surge arrester.
Product description
The photovoltaic direct current lightning arrester is the lightning
protection measure adopted by Zhejiang toer Electric Co., Ltd. for
the domestic solar power generation. It is designed and
manufactured according to the standard of IEC and GB. At the same
time, it meets the requirements of IEEE802.3AT. Low level of
residual pressure, sensitive reaction, stable performance, reliable
work and so on, let you no matter what weather can be safe to use,
rest assured use, no longer worry about thunderstorms what harm!
Product features
1. thunderbolt counting function, easy to understand the invasion
and frequency of lightning disasters.
2. equipped with high voltage DC fuse and circuit breaker, two
level safety protection device.
3. the protection level is up to IP65, which meets the requirements
of outdoor installation.
4. leakage intelligent recognition
Product specification
| Model | RTS3-C40 |
| Rated Operating Voitage | UC | 500 | 800 | 1000 |
| Voltage protective level | Up(KV)≤ | 1.8 | 3.0 | 3.6 |
| Max discharge current | Imax(8/20μS) | 40 |
Nominal discharge current
| In(8/20μS) | 20 |
| Ressponse time | NS | <25 |
| Lndication of invalidation | Aging invalidation:green Normal,red:Invaldation |
| Operating condition | Temp:-40℃~+70℃ |
| RH≤95%(25℃) |
| Sea level elevation≤3km |
Remote signal function
| Can also picking |
| Remarks | Other max continuous operating voltage can be customized
|
Working principle of product
In the solar photovoltaic system, the inductive or capacitive
coupling voltage is caused by the lightning shock and the switching
operation of the upstream power supply system. Therefore, the surge
may damage the photovoltaic modules and inverters, which will cause
serious consequences for the operation of the photovoltaic system.
The photovoltaic lightning arrester is specially developed for this
purpose. The lightning protection module of the DC power supply,
once the high voltage, and endanger the insulation of the protected
equipment, the lightning arrester acts immediately, and the high
voltage impact current is directed to the earth, thus limiting the
amplitude of the voltage and protecting the insulation of the
equipment. When the overvoltage is gone, the arrester is restored
to its original state quickly, so as to protect the power
equipment.
Use of attention
1. it is recommended to fuse fuse or automatic circuit breaker at
the front end of DC power supply lightning protection module.
2. this product does not need special maintenance at ordinary
times. It only needs to check regularly whether the connection is
loose and whether the working state is normal.
3. the connection line of parallel type power supply lightning
protection module is reliable and reliable, and the requirements
are short, thick and straight.
4. lightning protection device IN as input and OUT as output, the
input end is connected with the outside, and the output end of the
input end of the connecting device is protected.
Company profile
Incorporated in 2006, Zhejiang Thor Electric Co., Ltd has built
everything to offer a wide range of innovative and reliable surge
protection solutions and products.
Thor is following the international quality system standards, is
ISO 9001 certified and technical standards are in line with
GB18802.1-2011/IEC61643-1.
Product packaging:Carton packing
Transportation method
1. Express company: FEDEX,UPS,DHL,TNT
2. Trains, ships, aircraft transport
