power conversion socket, surge protection, lightning protection
switch converter, British standard.
Brief introduction
The power converter, also known as the AC converter, is one of the
transformers, which can transform the use of different voltage.
When the operation is overvoltage or the lightning overvoltage is
overvoltage, the energy that the ordinary power converter can only
absorb and its limited absorption can not even be completely
absorbed. Once the maximum value of its absorption energy is
reached, the internal temperature fuse will disconnect and cut off
the power supply. The power converter no longer provides power and
anti surge protection for your equipment, and the lightning
protection and anti surge protection converter can automatically
restore the switch protection for you to solve this harm and
trouble.
Product features
1. SPD lightning protection module provides three protection for
signal, radio frequency and power supply.
2. high quality flame-retardant shell
3. thickened copper band connections
4. built in ceramic gas discharge tube to absorb excess current.
Product specification
1.Rated Operating Voitage(UC):250V～
2. Voltage protective level(UP):1.0KV
3. Max discharge current(IMAX):6KA
4. Nominal discharge current(IN):3KA
5. Protection mode: L-N
6. technical parameter: MAX2.5KW-MAX10A
Working principle of product
Lightning plug is an instantaneous voltage absorber, which uses a
lightning rod or a varistor, is installed between the input lines
to form an infinite impedance. When the instantaneous voltage
occurs, the resistance device is rapidly reduced and the transient
energy is transferred to protect the efficiency of the internal
electrical equipment. Therefore, lightning protection socket can
effectively absorb surge pulses from power supply system, so that
electrical appliances can be used safely in harsh environment and
in multi mine area.
Use of attention
1. do not artificially change the shape of the plug
2. do not use two more powerful electrical appliances on one
socket.
3. if plugs or outlets or power lines are too hot or fire, they
should be stopped and replaced.
