LED outdoor lighting street lamp, 10KV, lightning protection,
waterproof, parallel surge arrester
Product introduction
LED lamp surge protector is the product of the LED power supply
system designed by Torr Electric Co., Ltd., which is applied to the
power system of the power supply system, using the GDT discharge
tube and the varistor compound symmetrical full protection
technology, to protect the LED lighting system from the damage of
lightning surge and overvoltage.
The product can be installed in the lampshade of LED lamp or in the
control cabinet. It is applied to many outdoor lighting systems
such as LED street lamp, tunnel lamp, outdoor landscape lamp and so
on.
Working principle of product
When the surge protector has no voltage, the impedance is very
high, which means that the circuit breaker is open. When the
voltage occurs, the impedance drops to a few Europe, and the surge
current will flow through the surge protector and will not enter
the device. At the same time, because the surge protector has a
small impedance at this time, the voltage on both sides of the
surge is relatively small, and because he is in parallel with the
protected equipment, it prevents the equipment from suffering from
large surge power. Pressure, so as to play the effect of discharge
and pressure limiting.
Product features
1. band failure protection, temperature protection, optional remote
communication mode, with LED working instructions.
2. fast response speed
3. with the power status indication, indicating the working state
of surge protector.
Product specification
1.Rated Operating Voitage(UC):275V
2. Voltage protective level(UP):0.8KV
3. Max discharge current(IMAX):6KA
4. Nominal discharge current(IN):3KA
Notice of product
1. lightning protector must be disconnected when installing and
maintaining, and no live operation is strictly prohibited to
prevent electric shock.
2. grounding lines should be short, thick and straight, so as to
reduce the influence of distributed inductors on the ability of
lightning electromagnetic pulse.
3. after correct installation, it can work steadily for a long
time. If it is found that the transmission performance of the
system is reduced or the signal is interrupted due to the cause of
surge protection, it should be maintained or replaced in time.
Company profile
Thor has been designing new products to meet the RoHS directive
since 2006. Thor’s ongoing commitment to RoHS compliance includes
continuing efforts to reduce the presence of hazardous substances
in the design and manufacture of a growing number of popular
products.
