For LED street lamp, lighting protector, pressure protector, lightning protector, waterproof and lightning protection

Product introduction

LED lamp surge protector is a product designed for the LED power system based on the relevant standards and designed for lightning protection of LED street lamp equipment. The protection of LED lighting system is not affected by lightning surge and overvoltage.
It also uses the function of leakage and continuous flow double blocking, which can bring failure remote signal alarm function, and have two kinds of failure modes, which are power break or protection release. It greatly improves the safety of LED street lamp.

Working principle of product

When the surge protector has no voltage, the impedance is very high, which means that the circuit breaker is open. When the voltage occurs, the impedance drops to a few Europe, and the surge current will flow through the surge protector and will not enter the device. At the same time, because the surge protector has a small impedance at this time, the voltage on both sides of the surge is relatively small, and because he is in parallel with the protected equipment, it prevents the equipment from suffering from large surge power. Pressure, so as to play the effect of discharge and pressure limiting.

Product features

1. instantaneous lightning protection, high endurance

2. high efficiency, long life

3. special melt sheet

Notice of product

1. installation personnel need corresponding construction qualification. N and L line cannot be reversed.

2. the protected equipment must have good grounding, and the grounding impedance is in accordance with relevant national standards.

3. this product needs no special maintenance. Lightning arresters should be checked regularly

Product specification

Company profile

Thor is all about protecting against the damaging effects of power transients. It is our goal and mission to connect our customer challenges with high-quality, right-priced solutions and products – completed by unrivaled customer service and technical support.
Incorporated in 2006, Zhejiang Thor Electric Co., Ltd has built everything to offer a wide range of innovative and reliable surge protection solutions and products.

Thor is all about protecting against the damaging effects of power transients. It is our goal and mission to connect our customer challenges with high-quality, right-priced solutions and products – completed by unrivaled customer service and technical support.

Incorporated in 2006, Zhejiang Thor Electric Co., Ltd has built everything to offer a wide range of innovative and reliable surge protection solutions and products.

Thor is following the international quality system standards, is ISO 9001 certified and our technical standards are in line with GB18802.1-2011/IEC61643-1.

All types and classes of our lightning and surge arresters 20KA~200KA(8/20μS) and 15KA~50KA(10/350μS) are tested and pass all the requirements based on their class.

Thor has been designing new products to meet the RoHS directive since 2006. Thor’s ongoing commitment to RoHS compliance includes continuing efforts to reduce the presence of hazardous substances in the design and manufacture of a growing number of popular products.

Zhejiang Thor Electric Co., Ltd is committed to meeting the requirements of the European Union’s Waste Electrical and Electronic Equipment (WEEE) directive. This directive requires producers of electrical and electronic equipment to finance the take-back for re-use or recycling of their products placed on the EU market after 2005.