LED SPD surge arrester, 10KA 20KV, American gauge lightning
protector, street lamp, lightning protector
Brief introduction
This product is designed for LED outdoor lighting system full range
of surge protection products, can effectively protect LED outdoor
lighting power supply system from lightning damage, widely used in
LED street lights, tunnel lights, outdoor landscape lights and many
outdoor lighting systems.
Product features
1. can realize water release and explosion-proof
2. high efficiency, long life
3. high precision constant current output
Product specification
| Model | TR6D |
| Rated Operating Voitage | UC | 275 |
| Voltage protective level | Up(KV)≤ | 0.8 |
| Max discharge current | Imax(KA) | 6 |
Nominal discharge current
| In(KA) | 3 |
| Operating condition | Temp:-40℃~+70℃ |
| RH≤95%(25℃) |
| Sea level elevation≤3km |
| Remarks | Other max continuous operating voltage can be customized |
Use of attention
1. in order to limit the inductive coupling between the protected
part after installation and the part of the unprotected equipment,
we need to make some measurements. The mutual inductance can be
reduced by the separation of the inductive source and the
sacrificial circuit, the selection of the loop angle and the
limitation of the closed loop area.
2. determine the discharge current path
3. this product needs no special maintenance. Lightning arresters
should be checked regularly
Working principle of product
When the surge protector has no voltage, the impedance is very
high, which means that the circuit breaker is open. When the
voltage occurs, the impedance drops to a few Europe, and the surge
current will flow through the surge protector and will not enter
the device. At the same time, because the surge protector has a
small impedance at this time, the voltage on both sides of the
surge is relatively small, and because he is in parallel with the
protected equipment, it prevents the equipment from suffering from
large surge power. Pressure, so as to play the effect of discharge
and pressure limiting.
Company profile
Thor has been designing new products to meet the RoHS directive
since 2006. Thor’s ongoing commitment to RoHS compliance includes
continuing efforts to reduce the presence of hazardous substances
in the design and manufacture of a growing number of popular
products.
Product packaging:Carton packing
Transportation method
1. Express company: FEDEX,UPS,DHL,TNT
2. Trains, ships, aircraft transport
