For LED street lamp, lighting protector, 10KV lightning surge
protector, waterproof lightning protection module
Working principle of product
When the surge protector has no voltage, the impedance is very
high, which means that the circuit breaker is open. When the
voltage occurs, the impedance drops to a few Europe, and the surge
current will flow through the surge protector and will not enter
the device. At the same time, because the surge protector has a
small impedance at this time, the voltage on both sides of the
surge is relatively small, and because he is in parallel with the
protected equipment, it prevents the equipment from suffering from
large surge power. Pressure, so as to play the effect of discharge
and pressure limiting.
Product features
1. perfect protection function
2. leakage current is small, the response time is fast, and the
residual pressure is low
3. compact structure, small size, easy to instal
Product specification
| Model | TR6D |
| Rated Operating Voitage | UC | 275 |
| Voltage protective level | Up(KV)≤ | 0.8 |
| Max discharge current | Imax(KA) | 6 |
Nominal discharge current
| In(KA) | 3 |
| Operating condition | Temp:-40℃~+70℃ |
| RH≤95%(25℃) |
| Sea level elevation≤3km |
| Remarks | Other max continuous operating voltage can be customized |
Product description
LED lamp surge protector is a product designed for LED power supply
system based on relevant standards. This product uses GDT composite
discharge and varistor compound symmetrical full protection
technology to reliably protect LED lighting system from lightning
and overvoltage damage. It also uses the function of leakage and
continuous flow double blocking, which can bring failure remote
signal alarm function, and have two kinds of failure modes, which
are power break or protection release. It greatly improves the
safety of LED street lamp.
Use of attention
1. compact structure, small size, easy to install
2. after the connection is completed, check the wiring correctly
and link reliability again, then switch on the power, and then put
into operation.
3. lightning protector must be disconnected when installing and
maintaining, and no live operation is strictly prohibited to
prevent electric shock.
Product packaging:Carton packing
Transportation method
1. Express company: FEDEX,UPS,DHL,TNT
2. Trains, ships, aircraft transport
