LED outdoor lighting, streetlights, parallel surge arrester, 10kV
light projector, high power surge protector
Brief introduction
LED lamp surge protector is a product designed for LED power supply
system based on relevant standards. Reliable protection of LED
lighting system is not affected by lightning surge and overvoltage.
It also uses the function of leakage and continuous flow double
blocking, which can bring failure remote signal alarm function, and
have two kinds of failure modes, which are power break or
protection release. It greatly improves the safety of LED street
lamp.
Product features
1. Large flow, low residual pressure
2. special melt sheet
3. core components use brand components
Use of attention
1. the protected equipment must have good grounding, and the
grounding impedance is in accordance with relevant national
standards.
2. please recognize the interface and the way of connection
3. this product needs no special maintenance. Lightning arresters
should be checked regularly
Product specification
| Model | TR6D |
| Rated Operating Voitage | UC | 275 |
| Voltage protective level | Up(KV)≤ | 0.8 |
| Max discharge current | Imax(KA) | 6 |
Nominal discharge current
| In(KA) | 3 |
| Operating condition | Temp:-40℃~+70℃ |
| RH≤95%(25℃) |
| Sea level elevation≤3km |
| Remarks | Other max continuous operating voltage can be customized |
Working principle of product
When the surge protector has no voltage, the impedance is very
high, which means that the circuit breaker is open. When the
voltage occurs, the impedance drops to a few Europe, and the surge
current will flow through the surge protector and will not enter
the device. At the same time, because the surge protector has a
small impedance at this time, the voltage on both sides of the
surge is relatively small, and because he is in parallel with the
protected equipment, it prevents the equipment from suffering from
large surge power. Pressure, so as to play the effect of discharge
and pressure limiting.
Company profile
Thor is all about protecting against the damaging effects of power
transients. It is our goal and mission to connect our customer
challenges with high-quality, right-priced solutions and products –
completed by unrivaled customer service and technical support.
All types and classes of our lightning and surge arresters
20KA~200KA(8/20μS) and 15KA~50KA(10/350μS) are tested and pass all
the requirements based on their class.
Product packaging:Carton packing
Transportation method
1. Express company: FEDEX,UPS,DHL,TNT
2. Trains, ships, aircraft transport
