small circuit breaker breaker DZ47 short-circuit protector for household total open air switch

Product description

DZ47 small circuit breaker is the current that can connect, load and break normal circuit. A mechanical switching device that can also connect and carry certain time and sectional current under specified abnormal conditions.

Product features

1. strict product structure, meticulous and comprehensive protection

2. advanced production process and beautiful appearance

3. safety insulation of fire retardant and high flame retardant material

Use of attention

1. the load connection of the leakage circuit breaker must pass through the load end of the circuit breaker, and no any line or zero line of the load does not pass through the leakage circuit breaker. Otherwise, the "leakage" will result in the circuit breaker closing, causing "misoperation". Besides, in order to protect the line and equipment more effectively, the leakage circuit breaker and fuse can be used together.

2. when the circuit is connected, check whether the wiring is correct. It can be checked by the test button. For example, the breaker can be correctly broken, indicating that the installation of the leakage protector is correct, otherwise, the line should be checked and the trouble should be eliminated. After the leakage protector is put into operation, every time after a period of time, the user should check whether the circuit breaker is running normally through the test button.

3. ambient air temperature does not exceed the ceiling 40 C, the lower limit of not less than -25 DEG C, and the average temperature within 24 hours of not more than +35 DEG C.

Product specification

Working principle of product

A small circuit breaker is the principle that the bimetal bending is directed regularly with the increase of temperature. When the circuit breaker is closed in normal working condition, the internal bimetallic sheet is heated by a certain current, and the thermal expansion coefficient of the two bimetalles is different. It is not enough to release the release mechanism. When the line appears general overload, when the overload current is reached, the bimetallic sheet has a larger bending angle and a lever in the release mechanism, which is enough to push off the release mechanism, and from the small circuit breaker, it plays the role of super load protection. The size of the bimetallic strip is different from that of the small circuit breaker.

Company profile

Thor is all about protecting against the damaging effects of power transients. It is our goal and mission to connect our customer challenges with high-quality, right-priced solutions and products – completed by unrivaled customer service and technical support.
Incorporated in 2006, Zhejiang Thor Electric Co., Ltd has built everything to offer a wide range of innovative and reliable surge protection solutions and products.

Product packaging:Carton packing

Transportation method

2. Trains, ships, aircraft transport

Thor is all about protecting against the damaging effects of power transients. It is our goal and mission to connect our customer challenges with high-quality, right-priced solutions and products – completed by unrivaled customer service and technical support.

Incorporated in 2006, Zhejiang Thor Electric Co., Ltd has built everything to offer a wide range of innovative and reliable surge protection solutions and products.

Thor is following the international quality system standards, is ISO 9001 certified and our technical standards are in line with GB18802.1-2011/IEC61643-1.

All types and classes of our lightning and surge arresters 20KA~200KA(8/20μS) and 15KA~50KA(10/350μS) are tested and pass all the requirements based on their class.

Thor has been designing new products to meet the RoHS directive since 2006. Thor’s ongoing commitment to RoHS compliance includes continuing efforts to reduce the presence of hazardous substances in the design and manufacture of a growing number of popular products.

Zhejiang Thor Electric Co., Ltd is committed to meeting the requirements of the European Union’s Waste Electrical and Electronic Equipment (WEEE) directive. This directive requires producers of electrical and electronic equipment to finance the take-back for re-use or recycling of their products placed on the EU market after 2005.