High rise building grounding pin, lightning rod, home arrester,
engineering lightning protection.
Brief introduction
The lightning rod product is designed according to the standard of
the GB national standard. Using advanced active energy pilot
discharge technology, the lightning rod can actively monitor the
change of the electric field around the surrounding area. By the
forced discharge, it can actively accelerate the downlink pilot.
Under the same height, the protection scope of the lightning rod is
larger than that of the traditional lightning rod, and the flash is
more accurate.
Working principle of product
lightning rod is connected to the ground through the wire and forms
the equal potential difference with the ground. Using its own
height, the electric field of the lightning cloud is distorted to
increase the electric field intensity to the limit value. The
lightning rod begins to ionize and descends the pilot discharge;
the lightning rod produces the tip discharge under the action of
the strong electric field, and forms the upward pilot discharge;
both are converge to form the lightning passage. Then, it goes into
the earth to achieve the effect of lightning protection. In fact,
the lightning rod is a lightning needle, which can lead the
surrounding lightning and discharge ahead of time and pass the
lightning current through its own grounding conductor to the
ground, avoiding the direct lightning strike of the protection
object.
Product features
1. superior conductivity
2. the lightning flow rate is large and the attenuation ratio is
high
3. installation is simple, solid and reliable
Product specification
| Model | Specifications | With flange height M | Texture of material | working temperature |
TRSB
| 3.1 | 1.2
1.5
1.8
The highest 20m can be done |
Stainless steel
|
-40℃ ～ +80℃
|
| 3.3 |
| 4.3 |
| 5.3 |
| 6.3 |
Use of attention
1. lightning rod grounding wire must be connected to the earth
reliably
2. check regularly whether the connection points of the bolts are
firmly grounded, and whether the lead off line is connected with
the grounding system reliably.
3. during installation, all parts must be connected reliably. After
installation is completed, there is damage on the joints or metal
surfaces, and rust treatment shall be done.
4. the lead off line should be broken card and insulation
protection near the ground.
Company profile
Thor is all about protecting against the damaging effects of power
transients. It is our goal and mission to connect our customer
challenges with high-quality, right-priced solutions and products –
completed by unrivaled customer service and technical support.
Ltd is committed to meeting the requirements of the European
Union’s Waste Electrical and Electronic Equipment (WEEE) directive.
This directive requires producers of electrical and electronic
equipment to finance the take-back for re-use or recycling of their
products placed on the EU market after 2005.
Product packaging:Carton packing
Transportation method
1. Express company: FEDEX,UPS,DHL,TNT
2. Trains, ships, aircraft transport
