Lightning protection protector , surge protector 40KA~80KA ,
factory switchgear
Brief introduction
The surge protector is a voltage switch type SPD fixed to the
indoor outlet for one port, and the product is designed and
manufactured according to the current national standards such as
GB50057-2010 and gb18802.1. It has the advantages of large impact
current and low residual pressure. The core components are composed
of multistage graphite gap. Reasonable design and precise
processing of the combination of spark and twisting together form a
sealing mechanism to ensure the safe distance of the spark gap.
Even when the surge current is passed, it will not produce the arc
discharge.
Product Installation
With 35mm standard DIN-rail mounting, connecting copper stranded
conductor is 2.5~35mm²
At front of spd each pole must be setted protection---used fuse or
miniature circuit breaker lightning current SPD protection,after
SPD breakdown to short circuit protection.
SPD install on protected line(equipment) to the front and connected
to the supply line. A class products install in the building
home-entry line hold larger surge current total distribution box.
B, C class products most install on the floor distribution box, D
class products close to the front-end equipment that smaller surge
current, smaller residual voltage place.
Product specification
| Model | | TRS9-B80 | TRS9-B100 | TRS9-B120 | TRS9-150 |
| Rated Operating Voitage | UC | 385 | 385 | 385 | 385 |
| Voltage protective level | Up(KV)≤ | 2.4 | 2.7 | 3.2 | 3.6 |
| Max discharge current | Imax(8/20μS) | 80 | 100 | 120 | 150 |
Nominal discharge current
| In(8/20μS) | 40 | 60 | 80 | 100 |
| Ressponse time | NS | <25 |
| Lndication of invalidation | Aging invalidation:green Normal,red:Invaldation |
| Operating condition | Temp:-40℃~+70℃ |
| RH≤95%(25℃) |
| Sea level elevation≤3km |
Remote signal function
| Can also picking |
| Remarks | Other max continuous operating voltage can be customized |
Product features
1. multi-functional overvoltage protection, lightning and
overpressure are no longer afraid of disasters.
2. the speed of response is 0.001 seconds, and the voltage is
controlled in the range that the equipment can withstand.
3. core components are strictly screened, stable performance and
reliable operation.
4. advanced production process and beautiful appearance
Notice of product
1. it should match the working voltage of the protected equipment.
Please install according to the installation sketch.
2. lightning protection device IN as input and OUT as output, the
input end is connected with the outside, and the output end of the
input end of the connecting device is protected.
3. standard RJ45 interface can be conveniently connected to the
front end of the protected equipment. The grounding path should be
as short as possible, and the length should not exceed 1.5 meters.
4, when installing, pay attention to cables coming in and out of
surge protective devices, so as to avoid the two coupling of surge.
Working principle of product
The function of surge protector is to limit the transient
overvoltage to the power line, the signal transmission line in the
voltage range that the equipment or system can bear, or to inflow
the powerful lightning discharge into the ground, and protect the
protected equipment or system from damage by the impact.
Company profile
Incorporated in 2006, Zhejiang Thor Electric Co., Ltd has built
everything to offer a wide range of innovative and reliable surge
protection solutions and products.
