T1 lightning arrester Installed in each electrical switchboard
Product description
Surge protector is a lightning protection measure adopted by
Zhejiang toer Electric Co., Ltd. for electrical system. It is used
to protect the lightning protection device of home housing. The
lightning protection device is used to protect sensitive lines and
protect the lightning and direct lightning or other instantaneous
overvoltage. The lightning arrester adopts the multi-stage
protection circuit, selects the brand components and makes use of
the advanced production technology. It has the characteristics of
large flow capacity, low residual pressure level, sensitive
reaction, stable performance, reliable work and so on.
Working principle of product
In the equipment system, the inductive or capacitive coupling
voltage is caused by the lightning shock and the switching
operation of the upstream power supply system. Therefore, the surge
may damage the photovoltaic modules and inverters and other
devices. This will cause serious consequences for the operation of
the system. The surge protector is a DC power defense specially
designed for this purpose. The lightning module, once the high
voltage, and endanger the insulation of the protected equipment,
the lightning arrester acts immediately, the high voltage impact
current guide the earth, thus limiting the voltage amplitude,
protecting the insulation of the equipment. When the overvoltage is
gone, the arrester is restored to its original state quickly, so as
to protect the power equipment.
Product features
1. new technology, high energy, gap discharge electrode N-PE.
2. module is designed and installed conveniently and can be
replaced directly.
3. easy to install and use
Product specification
| Model | TRS5-A12 |
| Rated Operating Voitage | UC(VAC) | 275 |
| Voltage protective level | Up(KV)≤ | 1.25 |
| Impuise current | Iim(KA) | 12.5 |
| Operating Frequency | 50HZ |
| Lndication of invalidation | Aging invalidation:green Normal,red:Invaldation |
| Operating condition | Temp:-40℃~+70℃ |
| RH≤95%(25℃) |
| Sea level elevation≤3km |
| Remote signal function | Can also picking |
| Remarks | Other max continuous operating voltage can be customized |
Use of attention
1. it should match the working voltage of the protected equipment.
Please install according to the installation sketch.
2. identify the input / output interface identifier of the
lightning protector, input the external line and output the
connection device.
3. this product needs no special maintenance. The lightning
arrester should be checked regularly, especially in the
thunderstorm season and the whole thunderstorm period. When the
system fails to suspect the lightning arrester, the lightning
arrester can be dismantled and rechecked. If the system is restored
to normal after the restoration to the state before use, the
lightning arrester has been damaged and must be replaced
immediately.
Product packaging:Carton packing
Transportation method
1. Express company: FEDEX,UPS,DHL,TNT
2. Trains, ships, aircraft transport
