T1 series surge protection device provide commercial grade AC power
protection
Brief introduction
The surge protector is a lightning protection measure adopted by
Zhejiang toer Electric Co., Ltd. for the electrical system. It is a
protective device for lightning protection and pressure protection
in household, third industry and industrial fields. It is mainly
used to limit overvoltage and discharge electric current. Surge
protector is usually connected with protected equipment. When
overvoltage is generated, it can play the role of shunting and
voltage limiting. To prevent excessive current and voltage damage
to equipment, play the role of protection devices.
Product features
1. Easy to install with small sizes
2. built-in overheating and temperature control circuit breaker
3. strict product structure, meticulous and comprehensive
protection
Product specification
| Model | | TRS-A15 | TRS-A25 | TRS-A50 | | Rated Operating Voitage | UC | 320 | 320 | 320 | | Voltage protective level | Up(KV)≤ | 1.2 | 1.5 | 1.7 | | Max discharge current | Imax(8/20μS) | 15 | 25 | 50 | Nominal discharge current
| In(8/20μS) | 15 | 25 | 50 | | Ressponse time | NS | <25 | | Lndication of invalidation | Aging invalidation:green Normal,red:Invaldation | | Operating condition | Temp:-40℃~+70℃ | | RH≤95%(25℃) | | Sea level elevation≤3km | Remote signal function
| Can also picking | | Remarks | Other max continuous operating voltage can be customized |
|
Working principle of product
Under normal working condition, the lightning protection module is
in a high resistance state. When the power supply line has
lightning invasion or operation transient overvoltage, the
lightning protection module will immediately pass through the
response speed of nanosecond level, and limit the lightning
overvoltage or transient overvoltage to the voltage range allowed
by the electrical equipment, thus protecting the normal operation
of the electronic equipment. After that, the lightning protection
module quickly returns to the high impedance state without
affecting the normal power supply of the grid.
Use of attention
1. lightning arresters are connected in series
2. The PE line of the lightning arrester must be reliably connected
with the ground wire of the lightning protection system, and the
connection line is short, thick and straight.
3. The PE line of the lightning arrester must be reliably connected
with the ground wire of the lightning protection system, and the
connection line is short, thick and straight.
Company profile
Thor has been designing new products to meet the RoHS directive
since 2006. Thor’s ongoing commitment to RoHS compliance includes
continuing efforts to reduce the presence of hazardous substances
in the design and manufacture of a growing number of popular
products.
