1.2/50 Type3 surge protective device Line detail protection

Product introduction

Surge protector is the lightning protection measures taken by Zhejiang tohr Electric Co., Ltd., which is independently developed and manufactured for electrical system. It is designed according to IEO and GB standards. It is applied to power supply protection of equipment system in areas with high lightning risk.
It can prevent all kinds of surge currents directly hitting lightning. It can be applied to single-phase and three-phase power supply lines and modular design through different combinations.

Product specification

Product features

1. traffic flow to further improve safety

2. advanced production process and beautiful appearance

3. use temperature control protection circuit, built-in thermal protection

Notice of product

1. lightning arresters are connected in series

2.The PE line of the lightning arrester must be reliably connected with the ground wire of the lightning protection system, and the connection line is short, thick and straight.

3. the relative humidity of the installation site is not more than 50% when the relative humidity of the air is 40.

Product specification

1. Rated Operating Voitage(UC):275V

2. Voltage protective level(UP):1.3KV

3. Max discharge current(IMAX):40KA

4. Nominal discharge current(IN):20KA

5. Ressponse time(NS):<25

Working principle of product

When the surge protector has no voltage, the impedance is very high, which means that the circuit breaker is open. When the voltage occurs, the impedance drops to a few Europe, and the surge current will flow through the surge protector and will not enter the device. At the same time, because the surge protector has a small impedance at this time, the voltage on both sides of the surge is relatively small, and because he is in parallel with the protected equipment, it prevents the equipment from suffering from large surge power. Pressure, so as to play the effect of discharge and pressure limiting.

Product packaging:Carton packing

Transportation method

2. Trains, ships, aircraft transport

Thor is all about protecting against the damaging effects of power transients. It is our goal and mission to connect our customer challenges with high-quality, right-priced solutions and products – completed by unrivaled customer service and technical support.

Incorporated in 2006, Zhejiang Thor Electric Co., Ltd has built everything to offer a wide range of innovative and reliable surge protection solutions and products.

Thor is following the international quality system standards, is ISO 9001 certified and our technical standards are in line with GB18802.1-2011/IEC61643-1.

All types and classes of our lightning and surge arresters 20KA~200KA(8/20μS) and 15KA~50KA(10/350μS) are tested and pass all the requirements based on their class.

Thor has been designing new products to meet the RoHS directive since 2006. Thor’s ongoing commitment to RoHS compliance includes continuing efforts to reduce the presence of hazardous substances in the design and manufacture of a growing number of popular products.

Zhejiang Thor Electric Co., Ltd is committed to meeting the requirements of the European Union’s Waste Electrical and Electronic Equipment (WEEE) directive. This directive requires producers of electrical and electronic equipment to finance the take-back for re-use or recycling of their products placed on the EU market after 2005.