Electric appliance, surge, surge protector, household lightning
protection switch, primary power supply protection.
Product description
Surge protector is an electronic device that provides security
protection for all kinds of electronic devices, instruments and
communication lines.
It is mainly used to limit overvoltage and discharge electric
current. Surge protector is usually connected with protected
equipment. When overvoltage is generated, it can play the role of
shunting and voltage limiting. Prevent excessive current and
voltage from damaging the equipment.
Working principle of product
In the equipment system, the inductive or capacitive coupling
voltage is caused by the lightning shock and the switching
operation of the upstream power supply system. Therefore, the surge
may damage the photovoltaic modules and inverters and other
devices. This will cause serious consequences for the operation of
the system. The surge protector is a DC power defense specially
designed for this purpose. Mine module.
Once the high voltage is present and the insulation of the
protected equipment is endangered, the lightning arrester acts
immediately and leads the high voltage impact current to the earth,
thus limiting the amplitude of the voltage and protecting the
insulation of the equipment. When the overvoltage is gone, the
arrester is restored to its original state quickly, so as to
protect the power equipment.
Product features
1. self protection voltage is more than self protection, automatic
disconnection and recovery.
2. with the power status indication, indicating the working state
of surge protector.
3. copper fittings have good electrical conductivity
Product specification
| Model | TRS2-C40 |
| Rated Operating Voitage | UC | 385 |
| Voltage protective level | Up(KV)≤ | 1.8 |
| Max discharge current | Imax(8/20μS) | 40 |
Nominal discharge current
| In(8/20μS) | 20 |
| Ressponse time | NS | <25 |
| Lndication of invalidation | Aging invalidation:green Normal,red:Invaldation |
| Operating condition | Temp:-40℃~+70℃ |
| RH≤95%(25℃) |
| Sea level elevation≤3km |
Remote signal function
| Can also picking |
| Remarks | Other max continuous operating voltage can be customized |
Notice of product
1. generally speaking, it is better to separate the protected
conductor from the non protected conductor, and it should be
separated from the ground wire. At the same time, in order to avoid
transient orthogonal coupling between power cables and
communication cables, necessary measurements should be made.
2. connect the grounding wire of the lightning protector with the
ground wire of the lightning protection system.
3. it should match the working voltage of the protected equipment.
Please install according to the installation sketch.
Company profile
Thor is all about protecting against the damaging effects of power
transients. It is our goal and mission to connect our customer
challenges with high-quality, right-priced solutions and products –
completed by unrivaled customer service and technical support.
Incorporated in 2006, Zhejiang Thor Electric Co., Ltd has built
everything to offer a wide range of innovative and reliable surge
protection solutions and products.
Product packaging:Carton packing
Transportation method
1. Express company: FEDEX,UPS,DHL,TNT
2. Trains, ships, aircraft transport
