BNC home lightning protection protector, control signal, lightning
protector, surge protector.
Product introduction
The control signal lightning protector is a lightning protection
measure adopted by Zhejiang tol Electric Co., Ltd., which is
independently developed and manufactured for signal circuit
protection. The control signal lightning arrester is mainly used to
protect the lightning (overvoltage) along the low voltage control
signal circuit, so as to protect all kinds of voltage connected
control signal equipment which are sensitive to electromagnetic
interference.
Product features
1. the low attenuation and return loss in the wide frequency range
ensure that the lightning arrester does not affect the system
performance.
2. core components are strictly screened and their performance is
superior.
3. low insertion loss to ensure unblocked lines
Use attention,
1. temperature: -40 to 70 DEG C; relative humidity: less than 95%;
atmospheric pressure: 70kPa ~ 106 kPa.
2. Connect the protector to the front end of the protected device,
so it must be connected reliably.
3. the lightning arrester is not required for long maintenance
without longer maintenance. It only needs to be maintained by the
system. In the course of use, the signal transmission is problem
and the signal transmission is restored to normal after the surge
protector is replaced, indicating that the surge protector has been
damaged and needs to be repaired or replaced.
Product specification
| Model and specofocation | | TRSS-BNC |
| Working voltage | | 24V |
| Max continuous operating voltage | Uc | 30V |
| Voltage protective level | Up(V)〈 | 〈60 |
| Nominal discharge current | In(8/20μS) | 10kA |
| Response time | ns | ≤10 |
| Characteristic impedance | | 75Ω |
| Insertion loss | | ≤0.1dB |
| Configuration dimension | | 52×25×25 |
| Interface mode | | BNC |
| Operating condition | | Temp:-40℃~+70℃ |
| | RH≤95%(25℃) |
| | Sea level elevation≤3km |
| Remarks | | Other max continuous operating voltage can be customized |
Working principle of product
The control signal surge protector is connected to the front end of
the protected equipment. When the transmission line is impacted by
the inductive thunder and other transient overvoltage, the impact
current is discharged to the earth through the protection branch of
the surge protector, and the output voltage is placed in the
allowable voltage range of the equipment, thus ensuring the safety
of the operating equipment.
Product packaging:Carton packing
Transportation method
1. Express company: FEDEX,UPS,DHL,TNT
2. Trains, ships, aircraft transport
