RJ11 industrial bus control signal arrester, analog signal,
lightning protector, DC power surge protector.
Working principle of product
The control signal surge protector is connected to the front end of
the protected equipment. When the transmission line is impacted by
the inductive thunder and other transient overvoltage, the impact
current is discharged to the earth through the protection branch of
the surge protector, and the output voltage is placed in the
allowable voltage range of the equipment, thus ensuring the safety
of the operating equipment.
Product features
1. The coefficient of standing wave is small and the range of
working frequency is wide
2. fast reaction speed
3. the low attenuation and return loss in the wide frequency range
ensure that the lightning arrester does not affect the system
performance.
Product specification
| Model and specofocation | | TRSS-RJ11 |
| Rated Operating Voltage | Un | 110V |
| Max continuous operating voltage | Uc | 150V |
| Voltage protective level | Up(V)〈 | 〈500 |
| Max discharge current | Imax(8/20μS) | 5kA |
| Nominal discharge current | In(8/20μS) | 3kA |
| Response time | ns | ≤1 |
| Adaptive date transfer rate | | 2Mbps |
| Insertion loss | | ≤0.5dB |
| Configuration dimension | | 52×25×25 |
| Operating condition | | Temp:-40℃~+70℃ |
| | RH≤95%(25℃) |
| | Sea level elevation≤3km |
| Remarks | | Other max continuous operating voltage can be |
| | customized(12V.24V.48V) |
Product Details
The control signal lightning arrester is a lightning protection
measure developed by Zhejiang tohr Electric Co., Ltd., which is
independently developed for signal circuit protection. The
lightning protection for the data communication system can protect
four signal lines or two pairs of twisted pair information lines,
providing high energy coarse level protection and low energy fine
protection for the data lines to protect them from the damage
caused by the induction overvoltage, the operating voltage and the
electrostatic discharge.
Use of attention
1. connect the lightning protector (SPD) between the line and the
equipment port to be protected. The grounding port on the SPD will
be connected to the ground network with multiple copper conductors,
and the grounding resistance should not be greater than 4 ohms.
2. grounding lines should be short, thick and straight, so as to
reduce the influence of distributed inductors on the ability of
lightning electromagnetic pulse.
3. before the protector is connected to the system, check the
grounding resistance of the grounding grid first. It should comply
with the specification requirements.
Company profile
Thor is all about protecting against the damaging effects of power
transients. It is our goal and mission to connect our customer
challenges with high-quality, right-priced solutions and products –
completed by unrivaled customer service and technical support.
Incorporated in 2006, Zhejiang Thor Electric Co., Ltd has built
everything to offer a wide range of innovative and reliable surge
protection solutions and products.
Product packaging:Carton packing
Transportation method
1. Express company: FEDEX,UPS,DHL,TNT
2. Trains, ships, aircraft transport
