Single phase power supply lightning protection module , Rails fixed
Easy to install
Brief introduction
Surge protector is used to protect sensitive lines and protect them
from damage caused by lightning induced voltage, power interference
and electrostatic discharge. We use multilevel protection circuit,
select brand components, use advanced production technology, with
low residual pressure, sensitive reaction, stable performance,
reliable work and so on. The product is standard 35mm guide rail
installation, easy installation, single module can be inserted and
replaced. According to different DC power sources, various
specifications can be selected, which can be applied to
multi-channel DC power supply system through different
combinations.
Product features
1. low output residual pressure to further ensure safety
2. strict product structure, meticulous and comprehensive
protection
3. self protection voltage is more than self protection, automatic
disconnection and recovery.
Product specification
| Model | | TRS-D10 | TRS-D20 |
| Rated Operating Voitage | UC | 420 | 420 |
| Voltage protective level | Up(KV)≤ | 1.4 | 1.7 |
| Max discharge current | Imax(8/20μS) | 10 | 20 |
Nominal discharge current
| In(8/20μS) | 5 | 10 |
| Ressponse time | NS | <25 |
| Lndication of invalidation | Aging invalidation:green Normal,red:Invaldation |
| Operating condition | Temp:-40℃~+70℃ |
| RH≤95%(25℃) |
| Sea level elevation≤3km |
Remote signal function
| Can also picking |
| Remarks | Other max continuous operating voltage can be customized |
Working principle of product
Surge protector is an indispensable device in lightning protection
of electronic equipment. It used to be called "lightning arrester"
or "overvoltage protector". The function of surge protector is to
limit the transient overvoltage to the power line and signal
transmission line within the electric pressure range that the
equipment or system can bear, or to inflow the powerful lightning
discharge into the ground. The protected equipment or system is not
damaged by impact.
Use of attention
1. lightning arrester must be reliably connected with the ground
wire of the lightning protection system, and the connection line is
short, thick and straight.
2. ambient air temperature is no more than +40 C and no less than
-5 C, and the average value of 24 hours is no more than +35 C.
3. this product needs no special maintenance. The lightning
arrester should be checked regularly, especially in the
thunderstorm season and the whole thunderstorm period. When the
system fails to doubt the lightning arrester, the lightning
arrester can be dismantled and rechecked. If the system is restored
to normal after the restoration to the state before use, it
indicates that the lightning arrester has been damaged and must be
replaced immediately.
Company profile
Zhejiang Thor Electric Co., Ltd is committed to meeting the
requirements of the European Union’s Waste Electrical and
Electronic Equipment (WEEE) directive. This directive requires
producers of electrical and electronic equipment to finance the
take-back for re-use or recycling of their products placed on the
EU market after 2005.
