DPU cabinet with high power socket, switch and socket, eight hole
surge proof discharge panel.
Working principle of product
The surge protector of PDU lightning protection socket is very high
when no voltage is needed, which is equivalent to breaking circuit.
When the voltage occurs, the impedance drops to a few Europe, and
the surge current will flow through the surge protector and will
not enter the device. At the same time, because the surge protector
has a small impedance at this time, the voltage on both sides of
the surge is relatively small, and because he is in parallel with
the protected equipment, it prevents the equipment from suffering
from large surge power. Pressure, so as to play the effect of
discharge and pressure limiting.
Product features
1. adopt professional lightning protection elements and structures,
and pass the professional lightning protection test, with the
national authority lightning protection certification.
2. exceed the highest working current 10A or the highest working
temperature 130 C, automatically disconnect the power.
3. the inner and outer shells are made of flame retardant
materials, which are blocked by open fire and high temperature
resistance, and the materials are safe and environmental friendly.
Use of attention
1. ensure that the grounding wire is reliably connected before the
power supply is re connected
2. do not wrap around the extension line socket. If the coil is
used, the current value of the luer can be lower than its rated
value.
3. lightning protection socket should be checked regularly and
check whether the indicator is working normally.
Product specification
| Model | TRS-PDU |
| Rated Operating Voitage | UC | 250V～ |
| Voltage protective level | Up(KV)≤ | 1.0 |
| Max discharge current | Imax(KA) | 6 |
Nominal discharge current
| In(KA) | 3 |
| Protection mode | L-N |
| technical parameter | MAX2.5KW-MAX10A |
Product description
The PDU lightning protection socket is designed for the
installation of the standard cabinet. It can effectively absorb the
surge pulse from the power supply system to ensure the safe use of
the electrical apparatus in the harsh environment and the multi
mine area. It is widely used in electronic equipment, electronic
and electrical appliances.
Company profile
Thor is all about protecting against the damaging effects of power
transients. It is our goal and mission to connect our customer
challenges with high-quality, right-priced solutions and products –
completed by unrivaled customer service and technical support.
Thor has been designing new products to meet the RoHS directive
since 2006. Thor’s ongoing commitment to RoHS compliance includes
continuing efforts to reduce the presence of hazardous substances
in the design and manufacture of a growing number of popular
products.
